Cannot connect to local mumble server

Question 1

I am struggeling to setup my own local mumble server.

Setup:

Windows 8
Mumble 1.3.0 Snapshot
Mumur 1.3.0 Snapshot

What I have done so far:

Installed and configured mumur (mumble server) with the murmur.ini
Opened Port 64738 in my Fritzbox router for UDP and TCP (each from 64738 to 64738 at port 64738)
Tested the opened port with http://www.canyouseeme.org/ -> Successful
Allowed mumble in windows firewall
Started the mumble server and the client both with admin rights to be sure
Tried to connect with my local(127.0.0.1), my intra(192.168…) and my Internet-IP(79.224…) -> all without success
Friend tried to connect from outside the network with my internetip -> no success

I am getting the following error in my serverlog:

<W>2014-09-23 18:47:46.543 MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running
<W>2014-09-23 18:47:46.543 Murmur 1.3.0 (1.3.0~384~g916dcc0~snapshot) running on WinX64: Windows 8 x64 - 6.2.9200: Booting servers
<W>2014-09-23 18:47:46.558 1 => Server listening on [::]:64738
<W>2014-09-23 18:47:46.574 1 => Server listening on 0.0.0.0:64738
<W>2014-09-23 18:47:46.590 1 => Failed to bind UDP Socket to 0.0.0.0:64738
<W>2014-09-23 18:47:46.590 Bonjour: Failed to load dnssd.dll
<W>2014-09-23 18:47:46.605 1 => Not registering server as public

Using netstat -ano | find ":64738" I get:

  TCP    0.0.0.0:64738          0.0.0.0:0              ABHÖREN         1304
  TCP    [::]:64738             [::]:0                 ABHÖREN         1304
  TCP    [::]:64738             [::]:0                 ABHÖREN         1304
  UDP    [::]:64738             *:*                                    1304

Any ideas are appreciated!

This issue has been fixed by using the older 1.2.8 stable version!

Question 2

I just reinstalled mumble. This time I used the stable 1.2.8 stable. This immediately worked!

Leave a Reply Cancel reply