procexp.exe has high CPU usage

Posted on


Once in a while The system starts consuming a 5-6 times more CPU than usual.
For instance if usually procexp.exe CPU usage is ~3%, it can get to 15-20% in that period.

In my opinion, this is not a problem with some specific process but rather hardware/OS.

The CPU temperature is below 50 deg. The RAM is also fine.


Use resource monitor to see what is spiking the cpu cycles

In the start search box type “resmon” without quotes to open it, then click the cpu tab, then click the cpu column header to sort it by highest or lowest number of cpu cycles,

enter image description here


Occasional spikes are nothing to worry about but if cpu cycles get used constantly at high numbers see the links below.

If it is an application causing high usage, see this article

If it is DPC Interrupt causing it see this article

Apparently the problem was with the laptop’s battery, regardless if it was plugged in to the electricity source.

I have re-imaged the laptop and it didn’t fix the problem.
Then I’ve changed the battery and the problem disappeared.

Check your hard drive temp and also run some diagnostic’s.

I changed from a 7200 RPM SATA drive to a ‘hybrid’ SSD/SATA and my usual/idle CPU load has dropped several %.

Check what times etc you’ve got your anti-virus scan/update, windows update and windows backup set to run…

Leave a Reply

Your email address will not be published. Required fields are marked *